Depending on the size and style of your kitchen cabinets, the price of installing them may vary. Wood types, labor costs, and other considerations can determine the total price. Before you hire Kitchen Remodeling Tacoma WA contractor to install your cabinets, determine how much space you need to fill with wall space. Once you have determined the number of cabinets you need, you can begin measuring the space for the filler board. Depending on the width of the gap, you may need to cut a filler board.
Cost of installing kitchen cabinets depends on the type of contractor you hire
The cost of installing kitchen cabinets is determined by the material and the level of customization you want. Installers charge by the box or linear foot, but you may also want to consider hiring a designer for an hourly rate. Prices for installation vary, but they can range anywhere from $50 to $200 per hour. Home depot does not install its products, so you will need to hire a separate contractor for that.
The type of cabinet you choose will influence the overall cost of installation. Large kitchens require more expensive cabinets. However, if you’re able to match the new cabinetry to your existing appliances, the costs will be less. Choosing matching cabinetry for all rooms in your home will create a cohesive look. During the prep phase, contractors will remove breakables from old units and clear a path for new ones.
Installation costs vary greatly based on the geographic location of your project. Generally, labor rates are lower in the Midwest than in the southern U.S. While major metropolitan areas have high installation rates, smaller urban centers will see installation costs hovering around $300 per cabinet. A good rule of thumb for installation charges is to charge ten percent of the purchase price. In most cases, this figure is in the range of $2,000 to $4000.
The cost of installing kitchen cabinets depends on the design and materials you choose. A standard kitchen cabinet installation can cost $200 to $400 per linear foot, while custom and semi-custom cabinetry can run anywhere from $12,500 to $30,000.
When hiring a kitchen cabinet installer, you should keep in mind that different sizes come with varying heights and widths. Base cabinets generally range from twenty-four inches to thirty-six inches. Wall cabinets are usually 12 inches to eighteen inches deep. Tall cabinets can range from eighty and ninety-four inches tall and may serve as a pantry. Depending on the size of your kitchen, the labor cost of installing kitchen cabinets will depend on the size and style of the walls and the height of the wall cabinets.
Wood options
When installing kitchen cabinets, you have several options for wood. Some woods are more durable and absorb more liquids than others. For this reason, you should choose those that are resistant to moisture and will maintain their appearance after a few years. Medium-density fiberboard (MDF) is an affordable alternative to solid wood cabinets. This material is also resistant to climatic changes and features a smooth, painted finish and no graining. It is ideal for cutting with a jigsaw. Ultimately, the material you choose for your cabinets will affect the design of your kitchen.
You also need to consider the cost of your new cabinets. Depending on the wood you choose, you may end up spending more than you had planned. Laminate and thermofoil are two of the least expensive options, costing only $50 to $75 per linear foot. These materials are also highly durable and can last a lifetime. However, they aren’t the most beautiful option for your kitchen, so choose them with caution.
Choosing the right type of wood is important because it will impact the look and feel of your kitchen. Pine, for instance, adds a rustic look, but is vulnerable to nicks. Oak is the most popular wood used for kitchen cabinetry, and it is durable and absorbs stains well. While oak and maple are both inexpensive woods, hickory and cherry have the most distinct colors and textures. Hickory and cherry are the most expensive, but they’re also the easiest to work with.
Maple is another popular choice for kitchen cabinet installation. Maple is a versatile wood species that can fit into many different decor styles. It comes in a light, creamy color and is known for its smooth texture. Maple can be stained or left natural for a natural look. Maple is also very durable, making it a great choice for many interior design schemes. It’s also a good choice for people with a budget.
The cost of installing wood cabinets varies based on the amount of wood used and the level of customization. On average, wood kitchen cabinets will cost between $100 and $300 per linear foot. If you’re buying only the cabinets, this amount will be closer to $1,100 for a kitchen with many cabinets. A kitchen with a high degree of customization will cost more than two thousand dollars. In this case, you should hire a cabinet installation company that offers both options.
Size of the cabinets
Before beginning your kitchen cabinet installation, measure the height of the walls, the countertop, and the base cabinets. The total height of all the cabinets should be 54 inches. To hang cabinets correctly, use a level. You can use it to make sure the line you mark is straight. Then, place the cabinets according to their height. Once they’re in place, use a screwdriver to attach the filler strips to the bottom.
After installing the base cabinets, install the countertops. If your countertops and base cabinets are recessed, the first cabinet should be flush with the lower cabinets. It may require a 1/4-inch gap filler to line it up. If the space between the cabinets is narrow, you can use filler strips to allow operating clearance. Use the same method to line up the second cabinet. Lastly, attach the countertop and the upper cabinets to the ledger.
When installing cabinets, it is important to keep in mind that narrower cabinet doors take up more space when opened. For these reasons, wider cabinets are common in larger homes. Reform usually installs 24″-wide cabinets, but they can also install 36-inch-wide cabinets. If you have a smaller space, consider using doors with hinges on the top. When measuring the height of your new cabinets, make sure to note the existing cabinet height and width.
Base cabinets come in different sizes. Standard heights are 12 inches or 24 inches. Standard depths for base cabinets are 24 inches, while full height cabinets are 30 inches. Generally, the depth of wall cabinets depends on the size of the space between the countertop and ceiling. A deep base cabinet will make it difficult to access the back appliances, so it is important to select the right depth. Furthermore, the height of the base cabinets should include the height of countertops, which often hang over the front.
Before installing the new cabinets, you must make sure that you’ve considered all the aspects of the installation process. Electrical outlets, plumbing, HVAC air ducts, microwave outlets, and other features will affect the size of the cabinets. Then, you should carefully measure the new layout. If you’re unsure of how to do this, seek the advice of a design center and get a template that can help you visualize your new cabinets.
Labor costs
The cost of labor for kitchen cabinet installation varies considerably. Most professionals charge 1.5 to three times the material cost. Large retailers and name brands often include installation costs in the overall project pricing. These companies often subcontract the installation work to a local professional who can guarantee the quality of the work. However, even the largest home improvement store is not likely to install cabinets unless you buy in-stock items. If you’d rather save money on the labor cost, you can try to do it yourself. However, you should not attempt to install cabinets yourself unless you have experience, and there are no guarantees that it will be done properly.
The labor costs for kitchen cabinet installation depend on the type of professional you hire to do the work. While professional installers prepare the area, a handyman can complete the installation task as well. Top cabinets are typically installed first, followed by base units. Assembling the boxes is an essential part of the process, but it’s not part of the total cost. It’s also important to note that you can save money by doing the work yourself, but it’s not the only factor determining the total cost of the project.
Choosing between framed and frameless cabinets should be done with caution. Framed cabinets are more expensive than frameless cabinets, and the framed variety features a flat front frame. Framed cabinets are less customized, but do require more labor and materials, and can cost anywhere from $4,000 to $20,000 per linear foot. Meanwhile, frameless cabinets have a heavier box that holds the cabinet door. The latter will cost between $6,000 and $30000.
When hiring a professional to install new cabinets, be sure to ask for an estimate before you hire a contractor. Remember to ask for a quote before hiring a professional, because the cost of labor and supplies can add up quickly. Then, you should take into consideration other hidden costs such as the cost of removing the old cabinets, the time needed to measure and refinish the cabinets, and removing the old cabinets. If your cabinets are in good shape, it may be cheaper to reface them.